Step 4: list of selected application identifiers, Selecting bar code type, Settings for advanced bar codes – QuickLabel Designer Express User Manual
Page 61: Gs1-128 bar code
- 61 -
Step 4: List of selected application identifiers
Listing the selected application identifiers
This is the last step of the GS1-128 Wizard. Here you can add, edit or delete Application Identifiers
and define separator among them.
Application Identifiers selected: In this field all selected application identifiers for the bar code
are listed in the order of creation. You can change the order with the arrow buttons.
Add, Edit or Delete buttons: Use these buttons to add additional application identifiers and edit or
delete existing ones.
Input Application identifier delimiter: Define left and right separator among different application
identifiers. The default setting is to use round parenthesis.
Preview: A sample bar code content based on your application identifier selection is shown here.
Click the Finish button to exit the wizard.
Selecting Bar Code Type
Settings for Advanced Bar Codes
GS1-128 Bar Code
This bar code is combined from one or more input values and standard AID - Application Identifiers.
Each AID must be followed by the standard values. These values can be fixed or variable.