Proel PRONET v.2.1 - Manual (Page 8)

8
2.3.2 Drivers installation for Windows XP
Step 1: Connect the USB2CAN converter to the USB port of your PC, Windows O.S. will detect the new
hardware connected and will ask for the drivers.
Step 2: Select the path of the folder driver in the PRONET installation folder.
When required, skip the Windows Logo warning message and continue the installation of USB2CAN driver.
At the end of the installation Windows will tell you if the drivers are successfully installed in Windows
Device Manager Panel.
Step 3: You can verify the right driver installation for the USB2CAN converter in the Device Manager Panel
(Fig.11).
Fig.8 Found new hardware (STEP 1)
Fig.9Driver installation (STEP 2)
Fig.10 Driver path (STEP 2)
Fig.11 Verify USB2CAN driver installation (STEP 3)