Proel PRONET v.2.1 - Manual (Page 6)

6
Step 1: Connect the USB2CAN converter or the PC240/260 USB connector to the USB port of your PC:
Windows O.S. will detect the new hardware connected and will ask for the drivers.
First of all Windows 7 / 8 will try to download the driver from Window Update repository, skip this
download and proceed with the manual installation of drivers.
Step 2: Open the Control Panel from Start menu and then click to open Device Manager. If you are
prompted for an administrator password or confirmation, type the password or provide confirmation.
Open the list of hardware categories, find the “other devices”/USB2CAN driver that you want to
install/update, and then right-click the name.
Click “Update Driver”, and then follow the instructions. If you are prompted for an administrator password
or confirmation, type the password or provide confirmation.
Step 3: Select the path of the folder driver in the PRONET installation folder.
C:\Program Files\Proel\PRONET\Driver\x86-32bit or C:\Program Files\Proel\PRONET\Driver\x86-64bit
Ignore the Windows warning about the driver publisher.
Step 4: Windows will tell you if the drivers are successfully installed in Windows Device Manager Panel.
Fig.1 Windows 7/8 driver installation: skip obtaining
drivers from Windows Update (STEP 1)
Fig.2 Windows 7/8 driver installation: confirm to
skip getting drivers from Windows Update (STEP 1)
Fig.3 Windows 7/8 driver installation: just close this
panel (STEP 1)
Fig.4 Windows 7/8 driver installation: update USB2CAN
driver in “Control Panel - Device Manager” (STEP 2)