Proel PRONET v.2.1 - Manual (Page 27)

27
NOTE: In “Protected” and “Factory” presets you can change the ganging only on pre-selected and pre-
matched channels (according with the factory preset routing and crossover settings), just to avoid critical
errors and copies of wrong channels.
General properties
This is a fast way to set the device name or to assign the device to a group.
Fig.40 General settings page for PC240-PC260's Setup Panel .
5.2.2 Active loudspeaker setup panel
Active loudspeakers have the same Setup Panel; editing the setup panel is a fast way to change the device’s
name or to assign a loudspeaker to a group of devices.
Fig.41 General properties page for loudspeaker’s Setup Panel .