Proel PRONET v.2.1 - Manual (Page 43)

43
6.6 Output page
Fig.59 Edit page for output crossovers and equalizers.
In the ‘Out’ pages you can control the output processing blocks available for each output channel.
You can control two fully programmable crossovers filter and five equalizer cells, together with level/trim,
polarity and mute.
The graphic window plots the frequency response of the output channel, i.e. for the cascade of crossover and
PEQ blocks, and for a single equalizer or crossover cell (the thin and colored line visualized selecting an
equalizer or a crossover cell). In the graphic window you can also check the phase response of the whole
channel or the phase response of a single equalizer/crossover cell, according with the visualization options
selected on the top of the window.
For each equalizer or crossover cell you can set many parameters and some of them can also be easily
controlled by the mouse within the graphic window, just dragging the colored dots on the frequency
response curve (according with the dragging options selected in “PRONET Settings”, see “Working with
PRONET” and “Settings”).