Proel PRONET v.2.1 - Manual (Page 29)

29
6.1.1 Input Level
Fig.43 Input level controls.
Level
Sets the level of the channel: this can be done using the graphic slider or the edit box.
Mute
This parameter mutes or un-mutes the channel. This parameter is not ganged.
0°/180°
Changes the polarity of the channel, i.e. this parameter reverses the phase of the signal.
Meter
Monitor the level of the audio signal: it reads the level of the signal just after the level and mute controls.
Note: the clip LED indication check the input signal both before the level controls and after the level controls
so it can detect if a clip occurs also in a muted channel.
6.1.2 Input Delay
Fig.44 Input delay parameters.
Value
Delay value.