Proel PRONET v.2.1 - Manual (Page 25)

25
1. Device ID and Device type;
2. Device name;
3. Group assignment;
4. Current preset number and current preset name (F = Factory preset, U = user preset,
*
= some
parameter has been changed in the device and new modified preset has not be saved yet);
5. Input signal LED and Input limit/comp and clip LED for left and right inputs;
6. Output limit LED for loudspeaker output;
7. Over Temperature protection LED indication: the device’s amplifier has run over the maximum
temperature range so the safety protection occurred and loudspeaker has been muted;
8. Average Power Protection LED indication;
9. Mute button (input mute control, not available for virtual devices);
10. Edit panel button: open the DSP edit interface;
For a complete description of how protections work, please, refer to subwoofer’s user manuals.
5.2 Setup panels
5.2.1 Processor setup panel
Fig.38 Routing page for PC240-PC260's Setup Panel .
Routing
In this setup page you can select the routing options for inputs (PC260 only), outputs and output meters.
Routing for input channels: this setup option is available only for PC260 and lets you select the input pair
connection to use between the analog input pair and the digital AES/EBU input pair. This option it is not
available for PC240.