Proel PRONET v.2.1 - Manual (Page 66)

66
Environmental parameters
Temperature: with this option you can set the ambient temperature. This parameter is used to calculate the
speed of sound for converting delay times into distance;
Temperature unit: sets the temperature unit scale (Celsius or Fahrenheit units scale);
See PC240/PC260 “Setup page” and “Editing processor parameters” for other details.
Firmware update
Opens the Firmware Update panel: here you can update the firmware of the remote device of reset/restore
its internal memory.
Check
This function is really useful to identify a loudspeaker in a group or array: when you press the “Check” button
the LEDs on the rear panel of the loudspeaker start flashing for some seconds.
7.6 Preset control
Fig.85 CORE PROCESSED Preset control section.
In the Preset section of the Edit Panel you can store and recall preset to/from the memory of a connected
device. In Preset section are also visualized some useful information about the device (Fig.85):
1. Connection status for a Real Device or indication of Virtual Device
2. Link Active or Not Active
3. Group Assignment
4. Current preset in use
5. Store/Recall buttons
The * symbol in the preset name visualization indicates that you made some changes in the current preset
and they aren’t saved yet.
With the Store and Recall Button you can open the Store/Recall panels, so you can easily save or recall your
favorite setup for each system and situation.