OnLine Power PBC I - Manual (Page 4)

3. Located by the TB1 and TB3 on the front panel of electric tray and inside of tray by
TB4 warns electric shock hazard may be present from live voltages and DO NOT
TOUCH the terminals of connector.
4. Located by the TB1 and TB3 on the front panel of electronic tray. See installation
manual before making connections.
5. By the RED labels on the front panel of battery tray warns to use COPPER
conductors only for customer's connections.
Follow all safety precautions:
CAUTION! ALL POWER TO THE UNIT SHALL BE
LOCKED AND TAGED “ OFF ” BEFORE ANY
SERVICING OR OTHER WORK ON THE UNIT.
CAUTION! THE BATTERY POWER TO THE UNIT
SHALL BE LOCKED AND TAGED “ OFF ” BEFORE
ANY SERVICING OR OTHER WORK ON THE UNIT.
CAUTION! THE BATTERY VOLTAGE CAN CAUSE
THE UNIT TO OPERATE WITH AC LINE POWER
“ OFF ” CARE SHOULD BE USED AT ALL TIMES.
CAUTION! A BATTERY CAN PRESENT A RISK OF
ELECTRICAL SHOCK AND
HAVE A VERY HIGH SHORT CIRCUIT CURRENT.
CAUTION! ALL BATTERY WORK SHOULD BE PERFORMED
ON THE GROUND, AS THE BATTERY TRAY WITH BATTERIES
CAN WEIGHT OVER 290 LBS. HANDLE CAREFULLY.
WEIGHT OF COMPONENTS
LU0.4XXX UNIT / LU0.7XX
650 WATT MODEL (TYPICAL)
• The 650 W Unit weight is approximately 365 lbs.
• The 650 W Electronic Tray weight is approximately 90 lbs.
• The 650 W Battery Tray weight, set of 4 batteries, is approximately 200 lbs.
LU1.5XXX UNIT
1300 WATT MODEL (TYPICAL)
• The 1300 W Unit weight is approximately 455 lbs.
• The 1300 W Electronic Tray weight is approximately 95 lbs.
• The 1300 W Battery Tray, set of 6 batteries, weight is approximately 200 lbs.
C