Work safety instructions – OnLine Power PBC I User Manual
Page 3

WORK SAFETY INSTRUCTIONS
Definition: The Caution and Warning markings and labels.
Indicates the surface temperature may be HOT! (label is red).
HOT
!
Indicates Caution (label is yellow).
Caution
!
1. Located by Input CB1 indicates turning these breakers to ON energizes unit.
As the unit maybe energized even after input CB1 is turned to OFF by the power
supplied by the batteries, turn the battery tray CB2 breakers to OFF.
2. Located by Output CB3 indicates that turning this breaker to OFF, shuts OFF all
output power that is connected at TB2.
3. Located by battery tray CB2 indicates that turning ON this breaker supplies an
alternate battery power source to electronic tray and the output even when the input
CB1 is OFF. Turn breaker CB2 to OFF prevents the batteries from supplying power
to the output when in-out fails or drips (goes low in voltage).
4. Located by the door locks indicates the requirement of a special tool, #8 allen key.
a. Only qualified personnel shall use the Allen Key in the ¼ turn lock to open the
door and access the inside of unit.
5. Located by the RED labels on the front panel of battery tray warns that Electric
Shock Hazard may be present with the input power disconnected. Ups may be
energized from the batteries.
6. Located by the YELLOW labels on the left front side panel of battery tray warns
tery terminals are coated with PRO-OX to seal and protect.
bat
a. PRO-OX contains petroleum distillates.
b. WASH! hands thoroughly after touching with soap and water.
c. If ingested induce vomiting.
RED LABEL is for WARNING!
1. Located by the RED labels on the front panel of battery tray warns Electric Shock
Hazard may be present, DO NOT TOUCH uninsulated battery terminals as from 12
volts DC to 72 volts DC, present at all times.
2. Located by the RED labels on the front panel of battery tray warns to use the same
type and rating of FUSE to reduce the risk of fire.
B