OnLine Power PBC I - Manual (Page 39)

A PPENDIX B: INSTALLATION ACCESSORY KIT PAD/POLE MOUNT PARTS LIST
For 120, 208, 240 VAC and 60 Hz -- PBC
DESCRIPTION QTY PART NO.
½ FLEXIBLE LIQUID TIGHT CONDUIT ( FOR ALARM CABLE) 14 FT
½ LIQUID FLEXIBLE METAL SEAL RING 2 T&B 5262
½ LIQUID FLEXIBLE METAL CONDUIT FITTINGS, 90 1 T&B 5352
½ LIQUID FLEXIBLE METAL CONDUIT FITTINGS, STR 1 T&B 5332
1” FLEXIBLE LIQUID TIGHT CONDUIT 14 FT
1” LIQUIDTIGHT FLEXIBLE METAL CONDUIT SEAL RING 2 T&B 5264
1” LIQUIDTIGHT FLEXIBLE METAL CONDUIT FITTINGS, 90 1 T&B 5354
1” LIQUIDTIGHT FLEXIBLE METAL CONDUIT FITTINGS, STR 1 T&B 5334
AC POWER CABLES 10 AWG 40 FT THHN-BLK-10-STR
AC POWER CABLES 10 AWG 20 FT THHN-WHT-10-STR
AC POWER CABLES 10 AWG 20 FT THHN-GRN-10-STR
6 AWG GREEN GROUND INSULATED CONDUCTOR 6 FT THHN-GRN-6-STR
M6 x 1.0 x 20 MM LONG, STAINLESS STEEL HEX BOLT 4
M6 STAINLESS STEEL, LOCKWASHER 4
M6 STAINLESS STEEL, FLATWASHER 4
6 AWG TO 2 AWG C-TAP CU 2
2 HOLE COMPRESSION LUG 6 AWG CU .75 CENTER TO CNTR 2
1” METAL CLAMP 7
½” METAL CLAMP 7
CONNECTOR 1 HEYCO P/N 3214
ALARM CABLE, DB-9, 20 FT 1
NOTES:
1. INTERCONNECTION HARDWARE BETWEEN THE UPS AND SERVICE ENTRANCE
IS NOT INCLUDED IN THIS KIT.
2. THE MAXIMUN DISTANCE BETWEEN THE UPS AND AUXILLARY CABINET
SHALL BE 3 FEET.
3. ALL CONDUCTORS SHALL BE COPPER.
32