Safety, Read and follow all safety instructions – OnLine Power PBC I User Manual
Page 2

SAFETY
This manual contains important instructions for the PBC models. Follow
instructions during Installation and maintenance of the UPS, Electronic Tray
and Battery Tray.
When using electrical equipment, basic safety precautions should all
always be followed including the following:
READ and FOLLOW ALL SAFETY INSTRUCTIONS
• Do not mount near gas or electric heaters.
• Check by inspection that all electrical connections are clean and tight.
• Equipment should be mounted in a location where it will not readily be subject to
tampering by unauthorized personal.
• Equipment should be kept under lock and key.
• Only qualified electrical personal should be permitted to maintain or service
equipment.
• Only accessories or equipment recommend by manufacturer shall be used with this
equipment, contact factory for approval.
• Check by inspection that all electrical connections are clean and tight.
• All terminal connections shall be TORQUE to value in table below.
Terminal Torque
In / lbs.
N-meter
TB 1
18.0
2.03
TB 2
18.0
2.03
TB 3
5.0
.56
XFMR LEADS
30.0
.56
CB 2 TRMINALS
30.0
.56
CABINET GND
30.0
.56
DOOR GND
30.0
.56
GROUND LUG
50.0
5.65
LIFTING PLATES
94.0
10.62
PAD MOUNTING BRACKET
94.0
10.62
TRAY TO CABINET BOLTS
76.0
8.58
A