MicroE Mercury II 6000V - Manual (Page 64)

Page 9 Section C - Linear Glass Scale Installation
Index and Limit Marker Installation
Linear Glass Scales
C2.2
Press your finger on the marker close to the edge
of the handle. Then, with your other hand, pull
up on the handle to detach it from the marker.
The handle will break away from the marker.
Carefully remove the blue protective film from the
marker surface.
TIP:
Use fingernails or plastic
tweezers to remove blue
protective film, but do not use
a hard metal object. Using a
hard metal object might
damage the grating on the
glass scale or the marker.
C2.3
(Applies only to Mercury II ™ 5000
and 4000 models)
Repeat steps C2.0 and C2.1 for the left and
right limit markers.