End cap installation – MicroE Mercury II 6000V User Manual
Page 49
![background image](https://www.manualsdir.com/files/798541/content/doc049.png)
Page 27
End Cap Installation
B9.1
Installing the End Caps on the
Mounting Surface
• Remove the adhesive liner from end cap.
• Place the end cap on the top of the scale and
epoxy so that the end of the scale is in the
middle of the end cap.
• Press down lightly to ensure adhesion and
let cure for 24 hours.
Section B - PurePrecision
™
Tape Scale Installation
This manual is related to the following products: