MicroE Mercury II 6000V - Manual (Page 44)

Page 22
PurePrecision ™ Tape Scale Installation
Removing The Blue Protective Film
B7.0
Put on finger cots or talc-free gloves.
Start the peeling process using fingernails or a
sharp tool. Begin from either end of the scale.
Be careful not to damage any
area past the first 20mm (0.8
inch) when starting to remove
the blue protective film.
If scale damage has occurred
beyond first 20mm (0.8 inch),
the tape scale may need to be
replaced.
The ends of the tape scale will
be covered and secured with
an end cap.
Clean the tape scale using
alcohol or acetone and a
lint-free cotton cloth.
Blue protective film
being removed
* USE FINGER COTS
Section B - PurePrecision ™ Tape Scale Installation