MicroE Mercury II 6000V - Manual (Page 26)

Page 4 Section B - PurePrecision ™ Tape Scale Installation
Pre-Installation Information
and Precautions
B1.0
Read all instructions completely before
beginning the installation process.
Make sure to follow the instruction sequence
throughout the installation process.
The PurePrecision ™ Tape Scale is a precision
metrological device. Handle it with the utmost care at
all times.
Avoid bending the tape scale
to a radius less than 90mm (3.5 inches)
Avoid twisting the PurePrecision
Tape Scale.
Do not let any sharp object
touch the tape scale after the
blue protective film is removed.
The PurePrecision Tape Scale is
protected by a blue film on the top that
prevents contamination and damage to
the grating pattern during installation.
Once the adhesive on the tape scale is
exposed (by removing the adhesive
liner), do not touch the adhesive or
allow any contamination to come into
contact with it.
PurePrecision Tape Scale, Index and
Limit Markers are designed for one time
installation only.
If removed from the mounting surface for
any reason, they should not be used for
any kind of reapplication. This will
affect the performance and reliability
of the encoder system.
Minimum
bending radius
90mm (3.5 inches)