MicroE Mercury II 6000V - Manual (Page 40)

Page 18
B6.2.4
Insert the designated "LEFT END" of the tape
scale (arrowhead on blue protective film
pointing away) into the Applicator Tool in
such a way that the 2 layers of the tape scale
go into 2 slots of the Applicator Tool as
specified below:
• The tape scale goes underneath the dowel
pin as shown and
• The lower adhesive liner enters the slot
behind the dowel pin. It is located exactly
in between the black colored surface and
white color surface as shown.
PurePrecision ™ Tape Scale Installation
By Applicator Tool
Section B - PurePrecision ™ Tape Scale Installation
Entry slot for
metal tape scale
(under dowel pin)
Entry slot for
adhesive liner
Exit slot for
adhesive liner