Final cleaning, inspectin and cure time, Final cleaning, inspection and cure time – MicroE Mercury II 6000V User Manual
Page 50

Page 28
Final Cleaning, Inspection
and Cure Time
B10.0
• Before using the encoder for servo control,
clean the tape scale, index marker and limit
markers using alcohol or acetone and a lint-free
cotton cloth or swab. Finally, inspect the tape
scale's surface for scratches, adhesive spots or
smears in the measuring length.
• A cure time of 12 hours is required for the tape
scale's pressure sensitive adhesive to achieve the
best performance and reliability.
Section B - PurePrecision
™
Tape Scale Installation
This manual is related to the following products: