MicroE Mercury II 6000V - Manual (Page 34)

Page 12
PurePrecision ™ Tape Scale Installation
By Hand
B6.1.4
Placing the PurePrecision ™ Tape Scale on
the mounting surface reference edge.
Place the edge of the designated "LEFT END"
of the tape scale against the mounting surface
reference edge as shown and press firmly
on the end. Be careful to place the end of
the scale correctly at the desired location.
NOTE:
Adhesive exposed by removing the adhesive
liner can touch the mounting surface only once.
Section B - PurePrecision ™ Tape Scale Installation