Pureprecision, Tape scale installation – MicroE Mercury II 6000V User Manual
Page 39

Page 17
PurePrecision
™
Tape Scale Installation
By Applicator Tool
B6.2.3
Peel and curl back a short length - about
30mm (1 inch) - of the adhesive liner from the
designated "LEFT END" of the scale as shown.
Take care not to touch the adhesive or allow
any particle contamination.
Be sure not to crease or fold the
adhesive liner. This will hinder
the tape scale movement through
applicator tool in the next step.
NOTE:
Do not peel off the blue
protective film at this time.
Section B - PurePrecision
™
Tape Scale Installation
Approx. 25mm (1 inch)
Approx. 25mm (1 inch) of
adhesive liner peeled out
Adhesive liner peeled
without being
creased/folded
Adhesive liner peeled more
than 25mm (1 inch)
Adhesive liner
creased/folded while
peeling out
This manual is related to the following products: