Measurement Computing SC-1608 Series - Manual (Page 8)

SC-1608 Series User's Guide Introducing the SC-1608 Series
8
OEM Hardware manuals
Refer to the hardware manual for each USB-1608G-OEM Series board for more information about the DAQ
features.
 USB-1608GX-2AO-OEM: www.mccdaq.com/PDFs/manuals/USB-1608GX-2AO-OEM.pdf
 USB-1608GX-OEM: www.mccdaq.com/PDFs/manuals/USB-1608GX-OEM.pdf
 USB-1608G-OEM: www.mccdaq.com/PDFs/manuals/USB-1608G-OEM.pdf
E-1608G-OEM
The E-1608-OEM provides the following features:
 Four differential (DIFF) or eight single-ended (SE) analog input channels (SE mode is required for use with
8B analog I/O modules)
 Sample rates up to 250 kS/s aggregate
 Two analog output channels (16-bit)
 Eight individually-configurable digital I/O channels
 One counter channel (32-bit) that counts TTL pulses
 Header connectors for mating with the SCC-8-8-2 baseboard
Hardware manual
Refer to the E-1608-OEM hardware manual at www.mccdaq.com/PDFs/manuals/E-1608-OEM.pdf for more
information about its DAQ features
Functional block diagrams
SC-1608X-2AO-USB
Figure 2 shows the functionality provided by a SC-1608X-2AO-USB with analog I/O 8B modules and digital
I/O SSR modules installed. The SC-1608X-USB and SC-1608-USB provide the same functionality without the
analog output capability.
Figure 2. SC-1608X-2AO-USB functionality
The USB-1608G-OEM Series devices receive power from the +5 V USB supply from your computer.