Datalogic Scanning Pegaso - Manual (Page 97)

Application Selector
Product Reference Guide B-13
Application Selector
The administrator can choose for the user to have access to the desktop or not. The
Application Selector can replace the desktop and limit the user to the specified list of
applications.
Figure B-10. Application Selector
The user can select/tap the desired application.
The administrator can customize this list as shown in "Application Selector" on
page
B-11 .
Application Switcher User Interface
The application switcher provides the same functionality as the standard Windows
®
Alt+Tab function. This allows the user to cycle through the various open applications.
The application switcher is activated via an assigned
Action key specified in the Hot Key tab. (Refer to "Set-
ting Hot Keys" on page B-5 .) When the assigned Hot
Key is pressed, the dialog shown to the right will be
displayed.
The application switcher can only be assigned to a sin-
gle
Hot Key , not a Hot Key with modifier keys. For
instance, + cannot be assigned to the task
switcher action, but can be.
Press the Hot Key assigned to open the application
switcher. Press the assigned Hot Key to cycle through
the running applications when the dialog is open.
Press
to switch to the selected application or
to close the application switcher.
The key can be used to close the Application Switcher .