Datalogic Scanning Pegaso - Manual (Page 125)

Product Reference Guide G-1
Appendix G
Programming Bar Codes
Overview
This appendix provides bar codes for common setup parameters for programming the
Pegaso. Factory default settings are
OUTLINED .
To make settings that are not provided in the chapter, you can design custom bar codes
or use the Falcon Management Utility (FMU) to program the Pegaso. Refer to "Config-
uring the Pegaso", on page
2-1 .
1D Symbologies
Symbologies and bar code setup parameters included in this appendix are:
• "Predefined Defaults" on page G-2 .
• "Codabar" starting on page G-2 .
• "Code 39" starting on page G-5 .
• "Code 93" starting on page G-7 .
• "Code 128" on page G-9 .
• "EAN-13" starting on page G-10 .
• "EAN-8" on page G-12 .
• "Interleaved 2 of 5" on page G-13
• "Matrix 2 of 5" on page G-15
• "MSI" starting on page G-17 .
• "Pharmacode 39 (Code 32)" on page G-19 .
• "RSS-14" on page G-19 .
• "RSS Limited" on page G-19 .
• "RSS Expanded" on page G-21 .
• "Standard 2 of 5" starting on page G-22 .
• "Trioptic" on page G-23 .
• "UPC-A" starting on page G-25 .
• "UPC-E" on page G-26 .
• "UPC/EAN Extensions" on page G-27 .
• "Other Controls" starting on page G-27 .
Depending on which Pegaso options you have, some programming parameters may not
be available on your unit. Refer to Table F-2 on page
F-3 for specific details on which
parameters are applicable.