Datalogic Scanning Pegaso - Manual (Page 11)

Product Reference Guide 1-1
Chapter 1
Batteries and Power
Overview
This section contains the following topics:
• "Suspend Mode" starting on page 1-1
• "Battery Warnings and Cautions" on page 1-2
• "Battery Disposal" starting on page 1-3 .
Suspend Mode
The Pegaso will go into a suspend or sleep mode when it is idle for a period of time.
This duration can be customized using the
Power control panel (refer to "The Battery
tab provides power indicators for External power, Main battery, and Backup battery as
shown in Figure 2-17 on page 2-20. To save your settings, tap OK on the command bar,
or press on the keypad." on page
2-20 . Suspend mode works and looks just like
you have turned the unit off. Press to suspend (put to sleep) the Pegaso. Press
again for the Pegaso to resume its previous state.
Use the Battery Power control panel to set the idle duration and the initiation of suspend
mode. These features save battery power when the unit is not in use. Refer to "The Bat-
tery tab provides power indicators for External power, Main battery, and Backup battery
as shown in Figure 2-17 on page 2-20. To save your settings, tap OK on the command
bar, or press on the keypad." on page
2-20 for more information.
Suspending
The following conditions will put the unit into suspend (sleep) mode:
1. When the unit is on, and you press for 0.5 second to initiate suspend
mode.
2. When the sleep timer expires, indicating that there has been no use for a specified
period of time.
3. A discharged battery pack.