Datalogic Scanning Pegaso - Manual (Page 65)

Installing & Setting Up Microsoft ActiveSync
Product Reference Guide 4-3
5. Click Next to continue the installation. Click Cancel to cancel the installation of
ActiveSync.
Figure 4-3. Microsoft ActiveSync Installer
6. Reboot your PC.
7. You have completed installing ActiveSync.
Setting up ActiveSync
1. Open ActiveSync from the Host PC.
2. Connect the Pegaso to the Host PC via a dock or USB/Serial cable.
3. Verify that the Pegaso is turned on.
4. Within a minute, the ActiveSync window should appear, attempting to connect to
a new device.
Figure 4-4. Microsoft ActiveSync dialog
5. If ActiveSync does not connect within two minutes, try the following: