Datalogic Scanning Pegaso - Manual (Page 31)

Network and Dialup
Product Reference Guide 2-17
Network and Dialup
To change the Network and Dialup connection settings, complete these steps:
1. Select Start > Settings > Network and Dialup Connections .
Figure 2-16. Changing the Network & Dialup Connection Settings.
2. Double-tap the connection to view or change the settings. The SDCCF10G1 item
shown as an example can vary, depending on the radio installed and the number of
connections.
3. Complete the two tabs as shown in Figure 2-16 :
• IP Address : Select DHCP or set static IP settings.
• Name Servers : If using static IP, set DNS and WINS servers.