Datalogic Scanning Pegaso - Manual (Page 50)

3-4 Pegaso™ Industrial PDA with Windows ® CE
Persistent Memory
In addition to the RAM-based storage standard on Windows CE terminals, the Pegaso
is also equipped with a persistent storage application and file storage area.
Saving to Persistent Memory
To save an application or data to the persistent memory, from your current application
select
File > Save As > and navigate to the location as described below.
Location
To access the contents of Persistent Memory:
1. Double-tap the My Device icon on the desktop.
2. Double-tap the FlashDisk icon to view.
Figure 3-1. Location of the FlashDisk
The persistent storage memory persists across all reset (warm/cold reboot) conditions
and software/firmware updates.
Because of this, Datalogic very strongly recommends installing all applications, applets,
programs, and important data files to the persistent disk of the Pegaso.
CAUTION
If an application or a data file is only installed or saved in RAM, a hard reset may result in
the loss of that application or data file.