Datalogic Scanning Pegaso - Manual (Page 88)

Falcon® Desktop Utility for Windows® CE
B-4 Pegaso™ Industrial PDA with Windows ® CE
Setting a Password
To set a password:
1. Enter a password in the field. This allows the user to specify a password when this
utility is launched. By default there is no password set.
2. Re-enter the password in the second field.
3. Select/tap Set Password to enable the password.
4. Select/tap OK close the Set Password Confirmation dialog.
Changing a Password
To change to a new password:
1. Enter a new value in the Enter Password field.
2. Re-enter the new value in the Re-enter Password field.
3. Select/tap Set Password .
Removing a Password
To remove a password:
1. Enter blanks in both Password fields.
2. Select/tap Set Password .
Password Request Dialog Box
Once the password is set, the next time you open the Falcon Desktop Utility , the FDU Pass-
word dialog box opens.
This dialog box will only open if a password was defined.
Be sure to record the Password for future reference.
You must select/tap Set Password prior to exiting FDU in order to store and
activate your new password. It is not necessary to select Enable Falcon
Desktop .
CAUTION
If you select/tap Restore Defaults it will remove all custom settings and
restore all the factory default settings, except a previously set password.