Datalogic Scanning Pegaso - Manual (Page 36)

Configuring the Pegaso
2-22 Pegaso™ Industrial PDA with Windows ® CE
Remove Programs
See "Removing Programs" on page 3-7 .
Storage Manager
To change the Storage Manager control panel default settings:
1. Select Start > Settings > Control Panel > Storage
Manager .
2. From the Store Info pull-down list, select the
desired storage device.
3. You can also format, dismount, and create par-
titions on storage devices using this control
panel.
4. To save and exit the Storage Manager control
panel, tap OK on the control bar, or press
on the keypad.
Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one item
with the stylus, another item is erroneously selected).
To recalibrate the touch screen, complete the following steps:
1. Select Start > Settings > Control Panel > Stylus to open the Stylus Properties dialog as
shown in Figure 2-20 on page 2-23 .
2. Adjust Double-Tap sensitivity if needed or desired.
3. Select the Calibration tab to open the Calibration application.
CAUTION
Dismounting or formatting the persistent storage drive will erase all files and programs
stored in Memory.