Datalogic Scanning Pegaso - Manual (Page 54)

3-8 Pegaso™ Industrial PDA with Windows ® CE
Firmware Update Utility
The Pegaso is equipped with a field upgradeable firmware mechanism. Firmware
updates for the Pegaso are uploaded to the Datalogic Mobile website
( www.mobile.data-
logic.com ). After you have downloaded the desired update, there are several ways you
can update the firmware on the Pegaso.
• Use the Falcon Management Utility (FMU) if you have multiple units to update.
Refer to the FMU User’s Guide on the Product CD included with your Pegaso for
more information.
• If FMU is not available or you have only a few units to update, use the Firmware
Update Utility (FUU), described below, to install or update the firmware using an
ActiveSync connection. Refer to "Installing & Setting Up Microsoft ActiveSync"
on page
4-1 for more information.
FUU can also be used to restore the firmware onto a Pegaso that has become corrupted,
such as would happen if the unit were powered down during an ActiveSync firmware
update. See "Restoring Pegaso Firmware" on page
3-11 .
The following sections provide procedures for the retrieval and installation of the most
current firmware image onto a Pegaso.
Retrieving a Firmware Image Update
The following instructions use Internet Explorer to retrieve the most current firmware
image.
1. Launch Internet Explorer on your PC and navigate to www.mobile.datalogic.com.
2. Navigate to the Downloads section of the website.
3. Select the product, desired language, and software updates. Click Go!
4. Select the file you want to download, then click Save and navigate to the location
where you want to save the firmware files.
5. Click Save again to begin copying the files to your local machine (or local network
location).
Installing FUU on the Host PC
The Firmware Update Utility (FUU) provides administrators with a field upgrade
mechanism. You must have Microsoft
® ActiveSync already loaded and running on the
host PC to use FUU. Refer to "Installing & Setting Up Microsoft ActiveSync" on page 4-1
and "Using ActiveSync" on page 4-5 for more information about ActiveSync.
Prior to installing FUU, you must remove any previous versions of FUU installed on the
host PC.