Marantz SR5004 - Manual (Page 9)

NAMES AND FUNCTIONS
7
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
NAMES AND FUNCTION
z I / POWER ON and OFF buttons
(When AMP mode is selected)
These buttons are used to turn the unit on or off.
x Z.SPKR button
(When AMP mode is selected)
This button is used to turn on and off ZONE
speaker.
c ZONE A / B buttons
These button are used to turn the ZONE system
on or off.
v 7.1 (7.1CH IN) button
This button is used to select the output of an
external multi channel decoder.
b SPKR A/B button
This button is used to select the speaker system.
The speaker system is switched in the following
sequence.
A → B → A+B → off → A
n MUTE button
This button is used to mute the audio for the
amplifi er.
m LIGHT button
This button is used to turn on the backlight for the
buttons.
, VOLUME +/– buttons
This button is used to adjust the volume for the
amplifi er.
. SURR (SURROUND) button
(When a mode other than USB is selected)
This button is used to selects the surround mode.
(When USB mode is selected)
This button is used to select the next page.
⁄0 INFO button
(When AMP mode is selected)
When this button is pressed, the current setting
of AV receiver are displayed on the connected TV
monitor.
(When USB mode is selected)
The display is switched between the list screen and
status screen during iPod operations.
⁄1 1, 2, 3, 4 (CURSOR) / ENTER
buttons
These buttons are used when controlling the cursor
of the unit, DVD or other AV equipment.
(When Tuner mode mode is selected)
PRESET +/ PRESET - buttons
Used to select a preset station up and down.
TUNE 3 /TUNE 4 buttons
Used to tune a frequency station up and down.
⁄2 EXIT / MEMO button
(When AMP mode is selected)
This button is used to cancel setting in the setup
menu.
(When TUNER mode is selected)
This button is used to store the setting of preset
channel and others.
⁄3 CONTROL buttons
These buttons are used when operating PLAY,
STOP, PAUSE and other commands of a source.
(When TUNER mode is selected)
T.MODE button
This button is used to select auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo
mode.
P.SCAN button
This button is used to start preset scan.
BAND button
This button is used to select a radio band.
T.DISP button
This button is used to select the display mode in XM
Satellite Radio and SIRIUS Satellite Radio.
PTY button
These button is not used for this unit.
F.DIRECT button
This button is used to select the "Frequency direct
input".
P.LOCK button
This button selects the parental lock of SIRIUS
Satellite Radio.
(When USB mode is selected)
; button
This pauses playback.
2 button
This starts playback.
9 button
This stops playback.
∞ / § buttons
Skips forward or previous.
5 / 6 buttons
Searches forward or backward.
⁄4 REPEAT button
This button is used to select the REPEAT mode of
a source.
⁄5 RANDOM button
This button is used to select the RANDOM mode
of a source.
⁄6 TV CONTROL buttons
These buttons are used when operating of TV and
Monitor.
⁄7 BASS / TV CH +/– buttons
(When AMP mode is selected)
These buttons are used to adjust the tone control of
low frequency sound for left, right and subwoofer
speaker.
(When TV/DSS mode are selected)
These buttons are used to change channels.
⁄8 TREBLE / CAT +/– buttons
(When AMP mode is selected)
These buttons are used to adjust the tone control of
high frequency sound for left and right speaker.
⁄9 CLR (Clear) / T.TONE button
This button is used to erase the memory or program
of a source include the Tuner mode.
(When AMP mode is selected)
This button is used to enter the test tone menu.
¤0 Numeric buttons
These buttons are used to switch between 0 to +10
of the source components.
If the source is set to the amplifi er, these buttons
are used to perform operations.
(When AMP mode is selected)
1/AUTO button
This button is used to select auto surround.
2/STEREO button
This button is used to select STEREO mode.
3/P.DIRECT button
When this button is pressed once, SOURCE DIRECT
mode is selected.
If pressed again, PURE DIRECT mode is selected.
4/SLEEP button
This button is used for setting the sleep timer.
5/M-DAX button
This button is used to select M-DAX mode.
6/EQ button
This button is used to select EQ modes including
Audyssey
® (see page 38).
7/LIP SYNC button
This button is used to select LIP SYNC mode.