Marantz SR5004 - Manual (Page 39)

NAMES AND FUNCTIONS
37
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
SETUP
ENGLISH
SETUP
Sleep Timer:
The sleep mode is available when the ZONE is
active, set the time with
1 or 2 cursor buttons. The
sleep timer can be set to a maximum 120 minutes
in 10 minute increments.
Stereo / Mono: (Zone A only)
This mode switches audio output to the ZONE
system between Monaural and Stereo, using the
1
and 2 cursor buttons.
Zone Pre Out: (Zone A only)
Switch the zone pre out “On” or “Off” with the
1
or 2 cursor buttons.
Volume Mode: (Zone A only)
Select whether the zone pre out level is Variable or
Fixed with the
1 or 2 cursor buttons.
Level (Volume Level): (Zone A only)
Adjust the zone pre out level with the
1 or 2 cursor
buttons. The volume can be set between
-90 dB and 0 dB in 1 dB increments.
Zone Speaker Out: (Zone A only)
Switch the zone speaker out “On” or “Off” with the
1 or 2 cursor buttons.
Volume Mode: (Zone A only)
Select whether the zone speaker out level is Variable
or Fixed with the
1 or 2 cursor buttons.
Level (Volume Level): (Zone A only)
Adjust the zone speaker out level with the
1 or 2
cursor buttons. The volume can be set between
-90 dB and 0 dB in 1 dB increments.
Zone Digital Out: (Zone B only)
Switch the zone digital out “On” or “Off” with the
1 or 2 cursor buttons.
Notes
• In ZONE A, it is impossible to use HDMI or
digital input (optical and coaxial) sources.
• In ZONE B, it is possible to use digital input
(optical and coaxial) sources.
• Zone Speaker Out setting can be changed when
the Surround Back is set to “None” in the
Speaker Size menu and “SPEAKER C” is in the
OFF position on the rear panel. When this setting
is unavailable, “***” is displayed.
• If “Volume” is set to “Fixed”, the ZONE output
level cannot be adjusted from the ZONE A.
• Zone Speaker Out cannot be on the ZONE B.
• In ZONE B, input sources that have not been set
cannot be used.
• There are no Stereo/Mono, Volume Mode, Level
(Volume Level) or Zone Speaker Out settings for
ZONE B.
• If Optical Output is set to Rec (See page 36), Zone
B functions cannot be used.
5-2 DC TRIGGER SETUP
This unit has a DC trigger control jack, which can be
used to link with input functions for the main ZONE
or ZONE A or ZONE B.
1.
Select “Preference” from Main Menu with
the 3 or 4 cursor buttons and press the
ENTER button.
2.
Select “DC Trigger Setup” with the 3 or 4
cursor buttons.
3.
Press the ENTER button to enter the
selection.
DC Trigger Setup
Trigger System Error!!
BLU-RAY
DVD
VCR
DSS
TV
CD/CDR
7.1ch Input
M-XPort
Tuner
USB Audio
Return
: Up / Down : Change Enter : Exit : Exit
: Disable
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
DC Trigger Setup
Trigger System Error!!
BLU-RAY
DVD
VCR
DSS
TV
CD/CDR
7.1ch Input
M-XPort
Tuner
Return
: Up / Down : Change Enter : Exit : Exit
: Disable
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
: * * *
SR6004
SR5004
4.
You can select “Main Zone”, “Zone A”,
“Zone B”, “Remote” or “Disable” with the
1 or 2 cursor buttons.
Note
• Remote is available for the external control. The
RC007SR/RC008SR cannot operate the function.
5. Select desired input source with the 3 or 4
cursor buttons.
6.
Set to “On” or “Off” with the 1 or 2 cursor
buttons.
7.
After you complete this portion of the
setup, move the cursor to “Return” with
the
3 or 4 cursor button and press the
ENTER button.
Note
• When an input source that is on in the set ZONE is
selected, voltage is output to the DC TRIG output
terminal.