Setup, English, 1 adjust user eq – Marantz SR5004 User Manual
Page 41: 2 check audyssey multeq
NAMES AND
FUNCTIONS
39
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
SETUP
ENGLISH
SETUP
Acoustic EQ.
EQ Mode
Adjust User EQ
Check Audyssey MultEQ
Audyssey Dynamic EQ
Audyssey Dynamic EQ Adj.
Audyssey Dynamic Volume
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Off
: Off
: 0dB
: Off
Adjust User EQ
Reset
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Channel
: Front Left
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
63
+9dB
[dB]
[Hz]
[dB]
[Hz]
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k
Check Audyssey MultEQ
EQ Mode
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Audyssey
: Front Left
: -15.0dB
: -2.0dB
: -5.0dB
: +9.0dB
: +3.0dB
: -5.0dB
: -7.0dB
: -18.0dB
: -20.0dB
63
+9dB
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k
6-1 ADJUST USER EQ
These modes allow you to set a 9-band graphic
equalizer for each of the 7 channels.
1.
Select
“Adjust User EQ” with the
3 or 4
cursor buttons.
2.
Press
the
ENTER button to enter the
selection.
[dB]
[Hz]
Adjust User EQ
Reset
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Channel
: Front Left
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
63
+9dB
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k
Reset:
Using the
1 or 2 cursor buttons, select the channel(s)
to be reset to either the currently displayed channel
(“Channel”) or all channels (“All-Channel”), and
press the ENTER button to enter the setting.
“All-Channel” : Resets all channels.
“Channel” :
Resets only the currently displayed
channel.
Channel:
Select the channel (“Front Left”, “Front Height
Left”, “Center”, “Front Height Right”, “Front
Right”, “Surround Right”, “Surround Back
Right”, “Surround Back Left” or “Surround
Left”) to adjust with the
1 or 2 cursor buttons, and
switch to the adjustment mode with the
4 cursor
button.
Frequency:
Select the target frequency on the graph with the
3 or 4 cursor buttons. Adjust the level with the 1
or
2 cursor buttons. (Note that this can be adjusted
to any level between –20 and +9 dB in 0.5 dB
increments.)
Move to the next frequency with the
3 or 4 cursor
buttons, and adjust the level.
After you complete this portion of the setup move
cursor to “Return” with the
3 or 4 cursor buttons
and press the ENTER button.
6-2 CHECK AUDYSSEY MULTEQ
®
These menus are for confi rming the results of Auto
Setup function equalizer measurement (Audyssey
Front, Audyssey Flat, Audyssey).
1.
Select “Check Audyssey MultEQ” with the
3 or 4 cursor buttons.
2.
Press
the
ENTER button to enter the
selection.
[dB]
[Hz]
Check Audyssey MultEQ
EQ Mode
Channel
63Hz
125Hz
250Hz
500Hz
1kHz
2kHz
4kHz
8kHz
16kHz
Return
: Up / Down
: Change
Enter :
Exit : Exit
: Audyssey
: Center
: -15.0dB
: -2.0dB
: -5.0dB
: +9.0dB
: +3.0dB
: -5.0dB
: -7.0dB
: -18.0dB
: -20.0dB
63
+9dB
0dB
-9dB
-18dB
125 250 500 1k 2k 4k 8k 16k
EQ Mode:
Select EQ (mode) with the
1 or 2 cursor buttons
followed by the desired equalizer (“Audyssey”,
“Audyssey Front”, “Audyssey Flat”).
Channel:
Select the channel to check with the
1 or 2 cursor
buttons.
Notes
• The frequency will not be exactly the same as in
the Preset Graphic EQ modes.
• Front Left and Front Right are not indicated on
the Audyssey Front mode.
3.
Once
fi nished checking, select “Return”
with the
3 or 4 cursor buttons and press
the ENTER button to return to the “Acoustic
EQ” menu.