Marantz SR5004 - Manual (Page 75)

NAMES AND FUNCTIONS
73
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TION
ENGLISH
ADVANCED OPERATION
4. Repeat step 3. until the last number of the
macro is displayed.
• The display will return to step 1..
• The each programmed operation is
transmitting when the number of the
macro is displayed.
5.
To return the normal mode, press and hold
down the ENTER button until MACRO is
disappeared on the LCD.
EDITING MACROS
Macros may be edited using following procedure.
4.
2.
1.
3.
3.
1. Press and hold the MACRO and MENU
button until the LEARN, MACRO indicators
and MACRO are displayed blinking on the
LCD.
2.
Press the numeric button to be changed.
Let’s use the example of programmed
MACRO 1, by pressing “1” button.
• LEARN, MACRO indicators and M1-01 is
displayed blinking.
3. Press the cursor button ( 3 or 4) to select
the number of macro to be edited.
• The programmed operation is displayed
after the number of macro is displayed.
• The number of macro can be changed
with the cursor button.
• To rewrite an existing macro step, simply
press function button and programed for
the new step. The old step will be erased
and rewritten with the new step.
• To insert a new step in between existing
steps in a macro, after step 3. press the
MEMO button, then press the button for
the new step. The numbers of the other
steps will be adjusted accordingly to
accommodate the new step. Since only
10 steps may be stored in any macro,
the tenth step will be erased if an step is
inserted when the total number of steps
is already 10.
• To erase a step in a macro, after step
3. call up the number of the step to be
erased and press the CL button.
4.
Press the ENTER button to return step 1.
5. To return the normal mode, press and hold
down the ENTER button until MACRO is
disappeared on the LCD.
USING MACROS
The following procedure will show how to use
macro buttons for which you have programmed
macros.
1.
2.
1.
Press the MACRO button
• MACRO indicator and MACRO is
displayed on the LCD.
2.
Press the numeric button for programmed
number and send the programmed code
step by step.
↓
• The remote controller will do nothing if
no macros are programmed.
The macro steps are executed in order.
Also, the step numbers displayed on LCD
disappear as each step is executed.
3.
After all macro commands have been
transmitted, the remote controller returns
to AMP in normal mode.
EXAMPLES OF MACRO PROGRAMS
EXAMPLE 1
Change the input source for the unit to CD and play
the 3rd track on a CD in the CD player.
7.
1.
4.
7.
2.
6.
5.
2.
3.
3.
4.
5.
1. Press and hold the MACRO and SET button
until the LEARN, MACRO indicators and
MACRO are displayed blinking on the LCD.
2.
Press the “1” button. M1-01 is displayed on
the LCD.