Marantz SR5004 - Manual (Page 7)

NAMES AND FUNCTIONS
5
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
o MENU button
Press this button to enter the SETUP MAIN
MENU.
!0 EXIT button
Press this button to exit from the SETUP MAIN
MENU.
!1 BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!2 T.MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo
mode. (See page 17)
!3 MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 45)
!4 PURE DIRECT indecator
This indicator illuminates when PURE DIRECT
mode has been selected.
!5 CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 46)
!6 VOLUME control knob
This knob is used to adjust the overall sound level.
Turning the control clockwise increases the sound
level.
!7 Infrared receiving sensor window
This window receives infrared signals for the
remote controller.
!8 AUX INPUT jacks
These auxiliary video/audio input jacks accept the
connections of a camcorder, portable DVD, game
etc.
Note
VIDEO terminal and S-VIDEO terminal cannot
be used at the same time. When using S-VIDEO
teminal, do not connect any component to the
VIDEO terminal.
!9 Cursor ( 3, 4, 1, 2) / ENTER button
Press these buttons to operate the SETUP MAIN
MENU and TUNER function.
@0 USB connector (SR6004)
Connect USB media or iPod to this USB connector.
(See page 19, 57)
@1 SETUP MIC jack
Automatically measure speaker characteristics
using the included microphone. (See page 28)
@2 PHONES jack
This jack may be used to listen to the unit’s output
through a pair of headphones. Be certain that the
headphones have a standard 1/4” stereo phono
plug.
NAMES AND FUNCTION
FL DISPLAY AND INDICATOR
ex1 ex2
A AC A AC
M P 3
M P 3 W M A W M A
a sd f gh k ¡1 ¡2 ¡3¡4 ¡6 ¡7 ¡8
¡9 ™0
¡5 l ¡0 j
Express Express
a SP (speaker) ABC indicator
This indicator is illuminated when the speaker
system is active.
s SLEEP timer indicator
This indicator is illuminated when the sleep timer
function in the main-ZONE is in use.
d DISP (Display Off) indicator
This indicator is illuminated when this unit is in the
display off mode.
f MULTI (ZONE system) AB indicator
This indicator is illuminated when the ZONE system
is active.
g TUNER’s indicators
AUTO : This indicator illuminates when the
tuner’s Auto mode is in use.
TUNED : This indicator illuminates when the
tuner receives a suffi ciently strong
radio signal.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned into stereo
condition.
h (Signal strength) indicator
This indicator indicates the strength of the XM
Satellite Radio or SIRIUS Satellite Radio signal that
is received.
j ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
k PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the ATT button on the remote controller.
(See page 8, 42)
l V-OFF (Video off mode) indicator
This indicator is illuminated when the Video-OFF
function is active.
¡0 A-SURR
(Auto Surround mode) indicator
This indicator is illuminated when the AUTO
SURROUND mode is in use.
¡1 EQ mode indicator
This indicator is illuminated when the HT-EQ function
is active.
¡2 NIGHT mode indicator
This indicator is illuminated when this unit is in the
Night mode, which reduces the dynamic range of
digital program material at low volume levels.
¡3 M-DAX indicator
This indicator illuminates when this unit is in the
M-DAX mode.
¡4 HDMI indicator
This indicator is illuminated when the HDMI device
is connected to the unit.