Marantz SR5004 - Manual (Page 57)

NAMES AND FUNCTIONS
55
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TION
ENGLISH
ADVANCED OPERATION
PRESET SCAN
2.
1.
3.
6.
5.
1.
Press the TUNE button twice within two
seconds on the remote controller.
2.
Press the BAND button to select SIRIUS
band.
3.
press the P.SCAN button on the remote
controller.
4. Preset channels are recalled in sequence
(No.1 → No.2 → etc.) for about 10 seconds
each. The time changes by the received
condition. No stored preset number will be
skipped.
5. Pressing the 2 cursor button during
prescanning speeds up scanning.
Also, pressing the 1 cursor button returns
to the previous preset channel.
6.
When the desired preset channel is
received, cancel the preset scan operation
by press the P.SCAN button.
CLEARING STORED PRESET CHANNELS
You can remove preset channels from the memory
using the following procedure.
3. 2.
2.
3.
1. Recall the preset number to be cleared with
the method described in ”PRESET SEARCH
MODE”.
2. Press the MEMORY button on the front
panel or the MEMO button on the remote
controller.
3.
The stored preset number blinks in the
display for 5 seconds. WhiIe blinking, press
the CLEAR button on the front panel or CLR
button on the remote controller.
4.
“xx CLEAR” appears on the dispIay to
indicate that the specifi ed preset number
has been cleared.
Note
• To clear all stored preset channels, press and hold
the T-MODE and the ENTER buttons on the unit
for two seconds.
PARENTAL LOCK
This function is used to lock channels you do not
want to receive.
SETTING/RELEASING PARENTAL LOCK
5. 2. 3. 5.
5.
3.
2.
5.
3.
1.
Tune to the channel that you want to set
parental lock.
2.
Press the T.MODE button on the unit or the
P.LOCK button on the remote controller.
P A S S W O R D
3.
When [PASSWORD ****] appears, use
the cursor buttons on the unit or remote
controller, or the numeric buttons on the
remote controller, to enter a password (4
digits), then press the ENTER button on the
unit or the remote controller.
Note
The password is set to 9999 when shipped from
the factory.
P A S W O R D O K !
S R 0 0 1 a b c d e f g
7 7 7 7 7
7 7 7
7 7 7
7 7
7 7 7 7 7
7 7 7
7 7 7
7 7
4.
When the correct password is entered,
[PASSWORD OK!] is displayed and the
display fl ashes “✔” or “:”.
5.
Set parental lock on/off using the 3 /
4 cursor buttons on the unit or remote
controller, then confi rm the setting using
the ENTER button on the unit or remote
controller.
“✔” Lock status
“:” Unlock status
You can unlock all locked channels at this
time by pressing the CLEAR button on the
unit or CLR button on the remote controller
for 5 seconds. When “ALL UNLOCK?” is
displayed, press the ENTER button on the
unit or remote controller. “UNLOCKING..”
is displayed and all locked channels are
unlocked.
Notes
• If you mistakenly enter the wrong password, you
will be asked to reenter the password.
• You can exit parental lock mode using the EXIT
button on the unit or CLR button on the remote
controller.
• No sound will be output when you tune to a locked
channel.
• Although parental lock can be set for more than
one channel, all channels will share the same
password.
• You cannot set Parental Lock for Channel 0.