Marantz SR5004 - Manual (Page 84)

NAMES AND FUNCTIONS
82
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
FRONT KEY (BUTTON)
LOCK OF THE UNIT
PURE DIRECT EXIT
The keys (buttons) on the front panel of the unit
(except POWER ON/STANDBY) can be locked so
that, except for remote control operations, none of
the unit's operations will be acknowledged.
HOW TO LOCK THE FRONT KEYS
(BUTTONS)
1. Hold down both the PURE DIRECT and EXIT
buttons on the front panel simultaneously
for at least 3 seconds.
2. “F-KEY LOCK!” is indicated on the display,
and no further operations initiated by the
front panel buttons, with the exception of
POWER ON/STANDBY, are acknowledged.
HOW TO RELEASE THE FRONT KEY
(BUTTON) LOCK
1. Again hold down both the PURE DIRECT
and EXIT buttons on the front panel
simultaneously for at least 3 seconds.
2.
“F-KEY UNLOCK” is indicated on the
display, and the lock is released.
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because
an electrostatic discharge or AC line interference
has corrupted the information in the equipment
memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect
the plug to the AC line supply
- re-attempt to operate the equipment
MEMORY BACKUP
In case a power outage occurs or the power cord
is accidentally unplugged, this unit is equipped with
a backup function to prevent memory data such as
the preset memory from being erased.
HOW TO RESET THE UNIT
SURR. MODE CLEAR
Should the operation or display seem to be abnormal,
reset the unit with the following procedure.
This unit is turned on, press and hold the SURR.
MODE + CLEAR buttons simultaneously for 3
seconds or more.
Remember that the procedure will reset the settings
of the function selector, Surround mode, delay time,
TUNER PRESET etc., to their initial settings.
XM SATELLITE RADIO
If a problem should arise, fi rst check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the operating instructions?
3. Are the speakers and other components operating properIy?
If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Symptom Cause Solution Page
“TUNER” is
displayed. The XM Mini-Tuner and this unit
are not properly connected. Check that the units are properly
connected.
23
“ANTENNA” is
displayed. The XM antenna is not properly
connected to the Mini-Tuner Dock.
Check that the antenna is properly
connected. Also, check the
antenna cable for damage.
23
“NO SIGNAL” is
displayed.
The Signal cannot be received. Reposition your XM antenna. –
Receiving only
channels 0 and 1.
The XM Mini-Tuner is not activated. Contact XM Satellite Radio. 47
“UPGRADE
TUNER” is
displayed.
The connected XM CNP-1000 is
incompatible.
Upgrade the XM CNP-1000 to the
XM Mini-Tuner.
Report the model of the AV
receiver and the ID number of the
CNP-1000 to XM Listener Care.
47
SIRIUS SATELLITE RADIO
Symptom Cause Solution Page
“TUNER ERR” is
displayed. SiriusConnect TM tuner is not
properly connected.
Check the 8pin mini DIN cable and
AC adapter connection are correct.
23
“ANTENNA” is
displayed
Antenna is not properly connected.
Check the antenna cable
connection is correct.
23
“ACQUIRING” is
displayed.
The signal cannot be received.
Reposition your SiriusConnect TM
tuner and antenna.
–
“CALL SIRIUS” is
displayed You have not subscribed for the
selected channel. Call SIRIUS if you want to
subscribe.
47
“FIRM UPDT” is
displayed SiriusConnect TM is updating
software.
Wait until the updating is
complete.
–