Kanguru Mini Clone - Manual (Page 41)

41
6. Error and Warning Messages Defined
The following chapter describes the most common error messages that you may encounter while using
your Kanguru miniClone.
6.1 Initialization Errors
If an error occurs during the initialization stage, the error will be displayed as follows:
The error message will be displayed on the first line
Any possible actions will be displayed on the second line
Disk Copy
Disk1 Disk2
ERR:Diskx is
Return
Error Message Definition
ERR : Diskx is not connected
Disk x is not connected, there is no
detectable disk connected.
ERR : Initialize Failure in Diskx Failed to initialize Disk x.
ERR : No Partition in Diskx
No partition information is found on
Disk x.
ERR : Partition is too large.
The partition information is larger
than the capacity of Disk x.
ERR : Diskx is Write Protected. Disk x is set under Write Protect.
If an error occurs during initialization process, the function cannot be continued. Press the ENTER
button to cancel the process and return to the main menu.
Error and Warning Messages Defined / Initialization Errors