Kanguru Mini Clone - Manual (Page 35)

35
5.6.1 General Option
From the Option menu:
1. Select General Option and then press the ENTER button. This will bring up the General Option
menu.
2. Press the Up or Down directional button to navigate the General Option items.
3. Press the Right or Left directional button to change any of the General Option items.
4. Press the ENTER button to save the current General Option configuration and return to the Options
menu.
General Option items include:
• 2TB Limit (ON / OFF) - Windows XP and earlier OS are not able to recognize HDDs larger than
2TB. 2TB Limit allows you to configure whether a HDD larger than 2TB in Device Mode will be
automatically limited to 2TB maximum capacity. The default setting is: ON.
• Spinup Wait Time (Auto, 1 - 30 sec.) - Configure the amount of time between when the first HDD
and second HDD spins up. The default setting is: Auto.
• SMART Check Period (OFF, 1 min - 3 hours) - Configure the amount of time between when the
miniClone checks the SMART status of your HDDs. The default setting is: 1 min.
• PIO Transfer Only (ON / OFF) - Configure whether the miniClone transfers data in PIO mode
only. The default setting is: OFF.
• Device Write Protection (ON / OFF) - Configure whether the hard drive that you connect through
Device mode (see section 5.1 Device, p.20 ) is write protected. If Write Protect is turned on, the
Device item in the main menu will be displayed “Device (WP)”. The default setting is: OFF.
Select Mode
Device(WP)
Copy
• Unplug Device (ON / OFF) - Configure whether you are able to disconnect a hard drive from your
PC in Device mode. The default setting is: ON.
• Auto Shutdown (ON / OFF) - Configure whether the miniClone automatically turns off after a
process (Copy, Compare, Erase or Check) is completed. The default setting is: OFF.
• Sector Count (8KB - 32MB) - Configure the capacity to assign to one sector. The default setting
is: 512KB. Caution! Changing this option may cause your HDD to malfunction.
General Option