Kanguru Mini Clone - Manual (Page 12)

12
3.4 Connecting External Hard Drives
The Disk 3 and Disk 4 ports are USB / eSATA combo ports. Both USB and eSATA external hard drives
or flash drives can be connected to these ports. Other USB storage devices like DVDRW drives or card
readers cannot be connected to these ports.
eSATA USB
It is possible to connect USB or eSATA devices that can operate on bus power to the USB / eSATA ports.
If the device requires more electricity than the miniClone’s rated value (500mA), it will not be possible
for the device to operate on bus power. You will need to connect the device’s external power supply in
order for the device to work with the miniClone.
Note: The Kanguru miniClone does not support devices secured by password protection or data
encryption.
Connecting External Hard Drives