Kanguru Mini Clone - Manual (Page 36)

36
5.6.2 Temperature Option
From the Option menu:
1. Select Temperature Option and then press the ENTER button. This will bring up the Temperature
Option menu.
2. Press the Up or Down directional button to navigate the Temperature Option items.
3. Press the Right or Left directional button to adjust any of the Temperature Option items.
4. Press the ENTER button to save the current Temperature Option configuration and return to the
Options menu.
Temperature Option items include:
• Temperature Unit (°F / °C) - Configure whether temperatures are displayed in degrees Fahrenheit
or degrees Celsius. The default setting is: °F
• Warning Temperature (OFF, 86 - 211°F) - Configure how high the hard drive’s temperature can
reach before the miniClone issues a warning. The default setting is 131°F.
• USB-FAN Temperature (OFF, 86 - 211°F) - A USB fan can be connected to the Disk 3 or Disk 4
USB / eSATA ports. When the temperature of a HDD goes above the temperature set here, the USB
fan will automatically be powered on by USB power. The default setting is 113°F.
Note: It is not possible to use a USB fan if the HDD connected cannot acquire the HDD temperature
in SMART.
Temperature Option