Kanguru Mini Clone - Manual (Page 27)

27
5.3 Compare
Compare mode checks the contents of two hard drives to make sure that the data on both drives are the
same.
There are two Compare functions that you can select: Disk Compare and Partition Compare.
Note: If you are comparing two hard drives with different capacities, the miniClone will only compare
up to the capacity of the smaller hard drive.
5.3.1 Disk Compare
Disk Compare checks the contents of two hard drives to make sure that the data on both hard drives are
the same.
To run a Disk Compare:
1. From the main menu, select Compare and then press the ENTER button.
2. From the Copy menu, select Disk Compare and then press the ENTER button.
3. Select the location of the first disk and then press the ENTER button.
4. Select the location of the second disk and then press the ENTER button.
5. A confirmation screen appears. Select Yes and then press the ENTER button. The Disk Copy
process begins.
Error reporting
If during the compare process there is an inconsistency detected, an error message will be displayed.
Skip
Abort
Disk Compare
ERR: Compare error
Retry
If you receive an error message:
• Abort - Cancels the compare process.
• Retry - The miniClone will try to continue with the compare process.
• Skip - Skip the current error and continue with the compare process.
• Auto Skip - Automatically skip over any errors during the compare process. The total number of
errors skipped will be reported when the compare process has completed.
Compare / Disk Compare