beautypg.com

Inline, One / inline, General information – Ivoclar Vivadent IPS InLine System User Manual

Page 72: Cementation

background image

72

General Information

Cementation

As usual, your dentist may use a conventional cementation protocol for metal-supported IPS InLine restorations or use
adhesive cementation for metal-supported restorations with a ceramic shoulder as well as IPS InLine veneers.
Glass ionomer cements, such as Vivaglass CEM, or self-adhesive composite cements are suitable for conventional cementa-
tion. For an adhesive cementation protocol, we recommend the Multilink Automix universal composite.

InLine

®

One /

InLine

®

/

InLine

®

PoM

IPS

IPS

IPS

conditioning of the restoration

Metal-ceramic restorations
– Sandblast the inner aspects of the crown (parameters according to the instructions of the manufacturer of the

restorative material) until an even mat surface has been achieved.

– If necessary, clean the restoration in an ultrasonic unit for about 1 minute.
– Thoroughly rinse with water spray and dry with oil-free air.
Important: In order to create a strong bond, do not clean the metal surfaces with phosphoric acid.
– Apply Monobond Plus with a brush or a Microbrush to the pre-treated surfaces, let it react for 60 s and then disperse

with a strong stream of air.

IPS InLine Veneers
– Etch the inner aspect of the veneer with IPS Ceramic Etching Gel for 120 seconds.
– Thoroughly rinse with water spray and dry with oil-free air.
– Apply Monobond Plus with a brush or a Microbrush to the pre-treated surfaces, let it react for 60 s and then disperse

with a strong stream of air.

esthetic

luting composites

Universal luting

composite

Self-adhesive

composite cement

Material

variolink

®

veneer

variolink

®

II

Multilink

®

Automix

SpeedceM

Polymerization

light-curing

light-/dual-curing

dual-curing

self-curing

Method

Adhesive: Adhesive: Adhesive: Self-adhesive

Syntac or ExciTE

Syntac or ExciTE DSC

Multilink Primer A/B

Total-Etch Total-Etch self-etching

IPS InLine One

One-layer metal-ceramic

IPS InLine

Conventional metal-ceramic

IPS InLine PoM

Press-on-Metal ceramic

IPS InLine Veneers

– –

Recommended product combination

Not recommended

Please observe the corresponding Instructions for Use.