Ivoclar Vivadent IPS InLine System - Manual (Page 55)

55
IPS
InLine
PoM
– Accurate Press-On Technique
IPS InLine System Opaquer f
The Opaquer F can be used to reinforce the in-depth
fluorescence.
– either: Apply the Opaquer F as a thin, third opaquer
layer and fire (930 °C/1706 °F).
– Or: Mix up to 20% of Opaquer F with the conventional
IPS InLine System Opaquer before the second layer is
applied and fire at 930 °C/1706 °F.
Powder opaquer
1 st Opaquer firing (wash firing)
(powder opaquer)
Select the IPS InLine System Powder Opaquer in the corresponding tooth shade. Remove the amount of powder opaquer
required for the wash from the jar and mix it thoroughly with the Powder Opaquer Liquid on the mixing pad until it has
reached the desired consistency. Apply the first opaquer layer thinly on the metal framework and agitate it into the alloy
surface. After firing and cooling, clean the opaquerized metal framework with the steam jet and dry with oil-free air.
Important
Mix IPS InLine System Powder Opaquer only with the Powder Opaquer Liquid.