beautypg.com

Step-by-step procedure, Starting situation, Framework design – Ivoclar Vivadent IPS InLine System User Manual

Page 51

background image

51

Starting situation

Step-by-step procedure

Maxillary and mandibular model articulated in the “Stratos 200”

Starting situation for the metal-supported IPS InLine PoM restoration

framework design

Design the framework with a reduced anatomical shape taking the planned press-on procedure into account. The wall
thickness for single crowns should be at least 0.3 mm and at least 0.5 mm for abutment crowns. Make sure to provide
sufficient stability of shape for the framework. Avoid sharp transitions and edges. Design the connector areas between the
individual units in such a stable way that they meet the requirements of interdental hygiene and the alloy used.

Design the framework in a reduced supported shape.

– due to the optical properties, the ceramic should feature a thickness of at least 0.8 mm in connection with

the press-on-metal technique.

– especially if frameworks are to be pressed over, it is recommended to attach retention grooves in the

palatal / lingual area.

IPS
InLine

PoM

– Accurate Press-On Technique