Ivoclar Vivadent IPS InLine System - Manual (Page 63)

63
Selection of ingots
Select the proper ingot. Only seven shades are sufficient to reproduce all the Chromascop, A-D and Bleach shades.
Therefore, it is possible to press fully anatomical restorations for different patient cases in one press cycle. The final tooth
shade is achieved by individual characterization using the IPS InLine System Shade/Stains and Glaze materials.
Given the two ingot sizes, the objects may be optimally fabricated with the corresponding number of IPS InLine PoM ingots
depending on the wax weight.
Pressing with the 100g, 200g, 300g IPS Investment ring System
Press parameters for IPS InLinePoM ingots in the IPS Investment ring System 100 g and 200 g
Investment Ring
100 g and 200 g
B
°C/°F
T
°C/°F
H
min
t
°C/°F/min
V
1
°C/°F
V
2
°C/°F
N / E
100 g 200 g
EP 500 / V 2.9 700/1292 950/1742 10 20 60/108 500/932 950/1742
0
Program 11-20
eP 600 /
eP 600 combi
700/1292 940/1724 10 20 60/108 500/932 940/1724
250 µm/
min.*
Programat eP 3000 /
Programat eP 5000
700/1292 940/1724 10 20 60/108 500/932 940/1724
250 µm/
min.*
*Important: If you enter the program manually, observe the abort criterion.
Provide a cold IPS Alox Plunger and cold IPS InLine PoM
ingots in the desired shade.
Insert the cold IPS InLine PoM ingot with the imprint facing
upwards into the hot investment ring.
Then, place the powder-coated IPS Alox Plunger into the
hot investment ring.
Place the hot and completed investment ring in the centre
of the hot press furnace using the IPS Investment Ring
Tongs.
Press START to start the selected program. Once the press program is completed, place the hot invest-
ment ring on the cooling grid using the Investment Ring
Tongs and allow it to cool to room temperature.
IPS Alox Plunger for the IPS Investment ring System 100g, 200g
BL
BL1,BL2,BL3,BL4
1
110,120,130,140
A1, B1
2
210,220,230,240
A2, B2, C1, D2
3
–
A3, A3.5
4
310,320,330,340
B3,B4
5
410,420,430,440
C2,D3,D4
6
510,520,530,540
A4,C3,C4 Rohling &
Touch Up
S & XS Rohlinge
S ingots
XS ingots
Ingots &
Touch Up
IPS
InLine
PoM
– Accurate Press-On Technique