beautypg.com

Harken 7410.11 MKIV Jib Reefing & Furling User Manual

Page 8

background image

8

MKIV Underdeck Unit 0

1. Swage stud at end of wire.
2. Open end of wire and install Norseman or Sta-Lok

®

stud after

foil is assembled.
3. Rod adapter nosepiece for Harken rod adapter stud: Threaded

nosepiece must have a positive lock as well as adhesive.

Use Harken stud with cotter pins. See page 22.

Options for Snaking Stay into Foils

Turnbuckle inside torque tube
Set up a pendant below making sure

to have a turnbuckle toggle.

Use a swage to swage turnbuckle

located just above the lower unit.

Check turnbuckle fit inside torque

tube. Requires a “third hand” to adjust.

Turnbuckle above swage
On smaller size wires 3/16" (4 mm)

a small turnbuckle should fit. Check

dimensions above for clearance.

Preassembly

Turnbuckle Options

WARNING! Using a threaded nosepiece with only

adhesive at the upper rod eye terminal may result

in headstay system failure. Make sure there is a

mechanical lock.