Harken 7410.11 MKIV Jib Reefing & Furling - Manual (Page 23)

MKIV Underdeck Unit 0 23
Assembly Attach Turnbuckle/Foil System to Boat
Thread turnbuckle to stud protruding from
foil. Assemble turnbuckle.
Note: If using Sta-Lok
® or Norseman ®
stud, you must use a washer above
stud as shown below.
Tip: Rig a large round plastic wash basin
below furler to catch any parts that may
be lost overboard.
Carefully raise foil and stay up onto boat.
Raise foils using line attached to feeder gap
as shown.
Adjust turnbuckle. Secure with cotter pin.
When stay length is set, use side cutters
or needlenose pliers to bend cotter pin
to secure turnbuckle.