Harken 7410.11 MKIV Jib Reefing & Furling - Manual (Page 4)

4 MKIV Underdeck Unit 0
Hub Assembly
Preassembly Parts
Bow Shackles
Trim Cap
Plastic Connector
Wedges
Feeder
Prefeeder
Halyard Swivel
5200
Adhesive
Injector
2' (610 mm)
Bottom Foil
7' (2.13 m)
Foils
Bottom
Connector
Connectors
Connector Bushings
Part No. Quantity Description
HFG951 1 Hub assembly with foil clamp
H-39923 1 Halyard swivel
Main Components
Part No. Quantity Description
7410.30 5 7'(2.13 m) foil
7410.33 1 2'(610 mm) Botton foil
Foils (Standard Package)
Quantity Description
1 Each 2.5, 3, 5 mm Hex keys
Tools
Part No. Quantity Description
7410.31 4 6.5" (165 mm) Connector
7410.32 1 10" (254 mm) Bottom Connector
HFG294 1 Connector bushing set (10-H-42067/10-H-42068)
HFG298 1 Plastic connector wedge set (12-H-39625)
HFG341 1 Foil screw set (26-HFS1105)
HFG679 1 Trim cap set (H-37335/H-37336)
HFG629 1 Trim cap screw set (3-HFS1126)
947 1 Prefeeder
H-39713 1 Feeder with screw and tab
2110 3 6 mm Bow shackles
HFG725 1 Injector, 1 oz. 5200 Adhesive (HFG722)
HFG739 2 Red Loctite ® (for foil screws)
Other Components
2.5, 3, 5 mm
Hex Keys
Trim Cap Screws
Forward Ø Min Break Strength Aft Ø
3 / 16 " (5 mm) 1300 lb (590 kg) 1 / 4 " (6 mm)
Line Specifications
Line (Not included with Furler)
Note: Line is not included with furler. Drum of
unit is smaller to allow it to fit into narrow bow
sections. If overlapping sails are used, standard
diameter line will fill up drum and jam furler. To
prevent this, use small diameter, high strength
line at forward end and have a rigger add a
cover at aft end where line is handled.
Foil Screws
Red Loctite ®