Harken 7410.11 MKIV Jib Reefing & Furling - Manual (Page 39)

38 MKIV Underdeck Unit 0
UNIT 0
Deck Drill Template
BOW
STERN
IMPORTANT: If you print this template from a computer file,
measure to confirm that template is the correct size.
2 3 / 4 " (70 mm)
5 1 / 8 " (130 mm)
5 29 / 32 "
(150 mm)
MKIV Underdeck Unit 0 Deck Drill Template
Hole Saw Size
See Above
4 1 /
2
" (115 mm)
!
6 7 / 16 " (163 mm)
8 3 / 16 "
208 mm
3 3 / 8 " (86 mm)
Hole Saw Size Recommendations
Read before drilling.
4 1 /
4
" (110 mm)—Requires some
beveling of bottom edge of deck hole
to provide a good fit. Alternatively, a
smaller hole may be used to fashion
a socket in deck to conform to ball
shape. This may improve appearance
and reduce amount of water that
enters.
4 1 /
2
" (115 mm)—Use if no beveling
to underside of deck is desired.
Hole Saw Size
See Above
4 1 /
4
" (110 mm)